Denon D-M51DVS, ADVM51 Speaker System User Manual


 
95
ENGLISH
(4) AUDIO SETUP is selected
3
Use the
0
and
1
cursor buttons to select the AUDIO
SETUP, then press the ENTER button.
DIGITAL OUT
Use this to select the digital outputs signal format.
LPCM (44.1 kHz / 48 kHz)
Use this to set the digital audio output when playing
DVDs recorded in linear PCM audio.
To exit the audio setup mode
Use the
and
ª
cursor buttons to select > NEXT DVD
MENU, then press the ENTER button.
The screen returns to as it was in step 2.
Use the
and
ª
cursor buttons to select the desired
setting, then press the ENTER button.
2
When DIGITAL OUT is selected.
NORMAL (Factory default)
Make the selection when playing back in surround
playback a DVD that has been recorded with Dolby Digital
or DTS on this unit.
The Dolby Digital or DTS digital signal is also output from
the digital output jacks.
PCM
DVDs that were recorded in Dolby Digital DTS are
converted to linear PCM 48 kHz/16 bit (2 channels). Make
the selection when making a digital recording.
To exit the digital out mode
Press the ENTER button, you can go back to the previous
screen.
DECISION : ENTER BUTTON
SELECT :
LPCM(44.1kHz/48kHz)
NORMAL
OFF
DIGITAL OUT
NEXT DVD MENU
AUDIO SETUP
AUDIO SETUP
DIGITAL OUT
NORMAL
PCM
SELECT :
DECISION : ENTER BUTTON
Remote control unit
Remote control unit
ENTER
Remote control unit
Remote control unit
ENTER
d
d
4
1
See page 88.
2