85
ENGLISH
(3) Turning the everyday timer and once timer on and off
• After the timer has been set using the procedure described under “(2) Setting the everyday timer and once timer” (pages 82 to 83), turn the
everyday timer and/or once timer on so that the set operations will be performed.
B
BAND
PHONES
VOLUME
ON / STANDBY
DVD SURROUND RECEIVER ADV-M51
TONE /SDB
FUNCTION
MENU/ SET
+
-
SURROUND /SELECT
PUSH
-
PARAM.
1
2
1
Press the MENU/SET button to set the timer standby setting
mode.
• The current settings are displayed.
MENU/SET
Main unit
1 on/E on
2
Turn the SURROUND/SELECT knob and select the timer to be
operated.
• The display switches as follows
each time the
SURROUND/SELECT knob is
turned:
1 on/E on
1 on/E off
1 off/E on
1 off/E off
Both the once timer and everyday
timer are activated.
Only the everyday timer is activated.
Only the once timer is activated.
• When either the once or everyday timer is activated, the
timer standby indicator lights. The display returns to
normal about 4 seconds after the timer standby indicator
is displayed.
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
The timer operation is performed when the SURROUND/SELECT
knob has been turned and the timer standby indicator has
been lit.
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
NOTES:
• The timer standby indicator does not light if the current time
has not been set. Set the current time before setting the timer.
(See page 81.)
• If the times set for the everyday timer and once timer overlap,
the once time has priority.
• Be sure to set the power to the standby mode when you want
the timer to operate.
Neither the once timer nor the
everyday timer are activated.
If you do not want the timer to operate,
turn the SURROUND/SELECT knob to turn
the timer standby indicator off.
• If only the once timer is set, the setting
changes as shown below each time the
SURROUND/SELECT knob is turned.
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
1on/E off f1off/E of
• If only the everyday timer is set, the setting changes as follows:
1off/E on f1off/E of