ENGLISH
57
(3)
Playback using the Dolby Headphone mode
• The ADV-M51 is equipped with the Dolby Headphone mode, a technology developed jointly by Dolby Laboratories and Lake Technology for
achieving 3D sound over regular headphones.
• The Dolby Headphone mode is set when headphones are connected to the ADV-M51’s headphones jack.
• There are actually four Dolby Headphone modes creating different sound field effects: DH1, DH2, DH3 and Bypass (normal stereo playback).
• The Dolby Headphone mode is compatible with Dolby Digital and DTS multi-channel sources. With 2-channel sources, playback in the Cinema,
Music 1 and Music 2 modes can be selected with the 2-channel mode setting.
BAND
PHONES
VOLUME
O
N
/
S
TANDB
Y
DVD
SU
RR
OU
ND RE
C
EIVER ADV-M51
TONE /SDB
FUNCTION
MENU/ SET
+
-
SURROUND /SELECT
PUSH
-
PARAM.
2,3
1
RC-936
A / V
3
STAT U S
RETURN
ANGLE AUDIO
SUB TITLE
SETUP TONE /SDB
FUNCTIONSURROUNDINPUT MODETEST TONE
DVD
ENTER
MUTING
DISPLAY MENU
TOP MENU
SYSTEM MD
CDR TAPE
TUNERTV / VCR
SURROUND
PARAMETER
CH SELECT
-
+
VCR CH
IN
/
SURR.
IN
/
SURR.
DVD
9
8
21
76
+
-
3
2
1
Connect headphones (sold separately) to the headphones
jack.
• When headphones are plugged in, the output to the
speakers is automatically turned off and no sound is
produced from the speakers.
PHONES
2
Press the surround parameter button and display the surround
parameters.
When the function is set to DVD, this is also shown on the
display.
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit
SURROUND
PARAMETER
Remote control unit
3
Set the various surround parameters.
If nothing is done for 6 seconds from when the parameter
is displayed, the normal display reappears.
SURROUND/ SELECT
PUSH
-
PARAM.
Main unit Remote control unit
• Dolby H mode setting
DH2 DH3 BYPASS
,/
DH1
• 2-channel mode setting
• The mode switches as shown below each time a button is
operated.
CINEMA
MUSIC2 MUSIC1
Can be selected when there is no signal or when playing a
2-channel source.
There are also the same parameters as those described under
“(2) Playing in the Dolby Virtual Speaker mode”, namely:
B D.COMP. setting
B LFE level setting
B DEFAULT setting
When the surround parameters are displayed, use the • and ª
cursor buttons on the remote control unit to switch to previous or
following items.
HDH1
2 CINEMA