Denon DN-A7100 Stereo Amplifier User Manual


 
11
ENGLISH
GENERAL INFORMATION OF RC-1065 TO DN-A7100
To control the DN-A7100 by your RC-1065, you have to select the device AMP or TUNER by pressing the
SOURCE button. Please refer below for the details in AMP and TUNER mode.
AMP MODE
TUNER MODE
POWER Turns the DN-A7100 on and off
SLEEP Sets the sleep timer function
DISPLAY Changes the front display mode
P-DIRECT Selects the pure direct mode
SURROUND Selects the surround mode
AUTO (1) Selects auto surround
DOLBY (2) Selects DOLBY mode
dts (3) Selects dts mode
BAND/LIP SYNC Select LIP SYNC mode
CS
II
(4) Selects CS2 mode
EX/ES (5) Selects EX/ES
VIRTUAL (6) Selects VIRTUAL mode
M-CH ST (7) Selects the Multi Channel Stereo
STEREO (8) Selects STEREO mode
NIGHT (9) Turns on or off NIGHT mode
7.1ch IN (0) Selects the 7.1ch input ports
A/D Switches between the analog or digital inputs
MEMO/HT-EQ Turns on or off HT-EQ mode
INFO Turns on or off the “On Screen Display”
MENU Display the current setting on the monitor
CURSOR
1
/
3
/
4
/
2
Moves the cursor for setting in “On Screen Display”
ENTER Enters the “On Screen Display”
Confi rms the setting in “On Screen Display”
T-TONE Enters the test tone menu
EXIT Exits from SETUP MENU
VOL+ Adjusts up to the over all sound level
VOL- Adjusts down to the over all sound level
ATT Reduces the analog input level
MUTE Decreases the sound temporarily
BASS- Adjusts down to the tone control of low frequency sound
BASS+ Adjusts up to the tone control of low frequency sound
TREBLE- Adjusts down to the tone control of high frequency sound
TREBLE+ Adjusts up to the tone control of high frequency sound
PTY/V-OFF Turns on or off Video output
CH-SEL Calls up SETUP MENU and adjusts speaker level or 7.1ch input level
AUX1 Input source select AUX1
AUX2 Input source select AUX2
TUNER Input source select TUNER
TV Input source select TV
DVD Input source select DVD
VCR Input source select VCR
DSS/VCR2 Input source select DSS/VCR2
CD Input source select CD
TAPE Input source select TAPE
CDR/MD Input source select CDR/MD
0-9 Inputs the numeric
BAND/LIP SYNC Select a radio band
T-MODE Selects the auto stereo mode or mono mode
P-SCAN Starts preset scan
CL Clears the input data
MEMO/HT-EQ Enters the tuner preset memory numbers
PRESET- Selects a preset station down
PRESET+ Selects a preset station up
TUNING- Tunes a frequency station down
TUNING+ Tunes a frequency station up
INFO Shows preset information
F-DIRECT Selects the “Frequency direct input”
T-DISP Selects the display mode in RDS
PTY/V-OFF Turns PTY group or type search mode on or off
AMP Select AMP mode
* POWER, SLEEP, DISPLAY, P-DIRECT, SURROUND, VOL+, VOL–, MUTE, BASS+,
BASS–, TREBLE+, and TREBLE- keys can be selected in TUNER mode the same
as in AMP mode.