Denon S-301 Stereo System User Manual


 
ENGLISH
System Setup System Setup
ENGLISH
50
When “TV TYPE” is selected:
Press the CURSOR
or
ª
button to select the
desired setting item, then press the ENTER
button.
4
PAL:
Select this when your TV’s video format is PAL.
If PAL is selected, output format is fixed to PAL.
MULTI:
Select this when your TV is compatible with both the NTSC
and PAL formats.
NTSC signals are output from the video output terminals
when discs recorded in NTSC format are played, and PAL
signals are output from the video output terminals when discs
recorded in PAL format are played.
NTSC (Factory default):
Select this when your TV’s video format is NTSC.
If NTSC is selected, output format is fixed to NTSC.
AUTO2:
Select this when the image recorded to the DVD is 30-frame
film material.
VIDEO1:
Select this for regular video material.
AUTO1 (Factory default):
Select this when the image recorded to the DVD is film
material.
6
When “PROGRESSIVE MODE” is selected:
Press the CURSOR
or
ª
button to select the
desired setting item, then press the ENTER
button.
When “PLAYER MODE” is selected:
Press the CURSOR
or
ª
button to select the
desired setting item, then press the ENTER
button.
5
VIDEO:
Set this to play the DVD video contents included on a DVD
audio disc.
AUDIO (Factory default):
Set this to play the DVD audio signals as such.
VIDEO2:
Select this for video material having little movement.
VIDEO3:
Select this for video material having a lot of movement.
When “HDMI AUDIO OUT” is selected:
Press the CURSOR
or
ª
button to select the
desired setting item, then press the ENTER
button.
3
-4
ON:
The audio signals are output via the HDMI connector.
OFF (Factory default):
The audio signals are not output via the HDMI connector.
8
Press the CURSOR
ª
button to select “NEXT
SETUP MENU”, then press the ENTER button
to enter the setting.
The next screen in the “SETUP” menu screen appears.
ON:
Select this to display the image with a ratio of 4:3 at the
center of a 16:9 TV, regardless of the image’s size.
OFF (Factory default):
Select this to display as full size of a 16:9 TV ,regardless of the
image’s size.
7
When “SQUEEZE MODE” is selected:
Press the CURSOR
or
ª
button to select the
desired setting item, then press the ENTER
button.
This can only be selected when the slide switch on the main
unit's rear panel is set to “WIDE (16:9)”.
No effective for interlaced image.