Denon S-101 Stereo System User Manual


 
39
ENGLISH
Advanced Operation Advanced Operation
ENGLISH
2 Changing the elapsed time
2 Changing the title, track or chapter
Input pressing the NUMBER buttons, then press the
ENTER button. (For DVDs)
For some discs it is not possible to change the title or chapter.
Input pressing the NUMBER buttons. (For video and
music CDs)
Playback starts from that track.
Input pressing the NUMBER buttons, then press the
ENTER button.
Example: For 1 minute 26 seconds Æ “00126”
Operating using the multiple audio, subtitle
and angle OSD
For DVDs containing audio language, subtitle language and angle
signals, the audio language, subtitle language and angle can be
switched during playback.
1
During playback, press the DISPLAY button.
•A screen with the time display icon ( ), selection
icon ( ) and picture quality adjustment icon
() are displayed.
2 Switching the audio language
(Multiple audio function)
3
Press the CURSOR
or
ª
button to select
“AUDIO”.
2
Press the CURSOR 0 or 1 button to select
“” icon.
The current AUDIO, SUBTITLE and ANGLE numbers are
displayed.
The display turns off when the DISPLAY button is pressed.
Press the CURSOR 0 or 1 button and the
NUMBER buttons to select and set the different
parameters.
4
2 Switching the subtitle language
(Multiple subtitle function)
If the desired language is not set after pressing the CURSOR
00
or
11
button several times, the disc does not include that
language.
The subtitle language set with the default settings is set when
the power is turned on and when the disc is replaced. If that
language is not included on the disc, the disc’s default language
is set.
When the subtitle language is changed, several seconds may
be required for the new language to appear.
When a disc supporting the closed caption is played, the
subtitle and the closed caption may overlap each other on the
TV monitor. In this case, turn the subtitle off.
•With some discs it is not possible to change the audio language
during playback. In such cases, select from the DVD menus
( page 17).
If the desired language is not set after pressing the CURSOR
00
or
11
button several times, the disc does not include that
language.
The language selected in the default settings is set when the
power is turned on and when the disc is replaced.
1
Press the CURSOR
or
ª
button to select
“SUBTITLE”.
Press the CURSOR 0 or 1 button and the
NUMBER buttons to select and set the different
parameters.
2
CURSOR
ENTER
DISPLAY
NUMBER