Filter
Top Products
68
Appendix
TipsSettingsConnections
Contents
Front panel Display Rear panel IndexRemote
Playback
Selecting audio programs
HD Radio Technology enables stations to broadcast multiple Audio
Program and data services on HD2 / HD3 / HD4 channels.
1
Select the tuning mode (“HD-Auto”, “Auto” or
“Manual”).
2
Press TUNE + or TUNE – to tune in the desired Multicast
channel.
•If the station you are tuning in has multiple audio programs,“HD1”is
indicated on the display.
If it only has one audio program, “HD” is indicated.
•When the unit receives multicast channels, the multicast program
number (HD2) is displayed to the right of the station name.
NOTE
•This function is not available for AM HD Radio stations because they cannot
broadcast multicast channels.
•If digital audio data cannot be received after the station is selected, or if the station
signal is weak, the unit may not be able to receive the multicast channels.
•If the station signal is weak, the digital audio of the multicast channel may cut out.
Listening to preset stations
1
Use CH/PAGE df or 0 – 9 to select the desired preset
channel.