Filter
Top Products
181
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey® Setup.
•If you change the speaker settings after performing Audyssey® Setup,
it will not be possible to select Audyssey MultEQ® XT32, Audyssey
Dynamic EQ® and Audyssey Dynamic Volume® (vpage156, 158).
•“Manual Setup” can be used without changing the settings. Please set
if necessary.
Amp Assign
Select power amplifier usage method to match your speaker system.
2 Assign Mode
Set the assignment mode.
7.1ch(SB/FH/FW) : Assigns all power amplifiers within this unit for
MAIN ZONE.
5.1ch + ZONE2 (Default) : Setting to assign the unit’s built-in power
amplifier for ZONE2 and output the audio in
stereo.
5.1ch + ZONE3 : Setting to assign the unit’s built-in power amplifier for
ZONE3 and output the audio in stereo.
5.1ch + ZONE2/3-MONO : Setting to assign the unit’s built-in power
amplifier for ZONE2 and ZONE3 and
output the audio in monaural.
5.1ch(Bi-Amp) : Setting to use the front speakers via the bi-amp
connection.
5.1ch + Front B : Setting to use the second set of front speakers for
playback. You can switch the front speakers A and
B to be used for playback in accordance with the
2-channel playback or multi-channel playback mode.
When you select this setting, also perform the
“Front Speaker Setup” (vpage187) procedure.
7.1ch/2ch Front : Setting to use the other front speakers for playback
when you do 2-channel playback in DIRECT or
STEREO mode. When you select this setting, also
perform the “Front Speaker Setup” (vpage187)
procedure.
9.1ch(SB/FH/FW) : Setting to use a maximum 9.1 channel speaker
system by using a combination of the unit’s
7-channel built-in amp with an external power amp
connected to a set of 2-channel speakers.