Filter
Top Products
164
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Pass Through Source
The AV receiver will “pass through” the sources HDMI signal when
in standby.
Last : Choose this option to “pass through” the last used HDMI input
video source.
CBL/SAT (Default) / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA
PLAYER / CD
z
: Choose one of these HDMI sources to be passed
through when the AV receiver is in standby.
z “Pass Through Source” can be set when any of the HDMI connectors is
assigned to “CD” for the input source in the “Input Assign” (vpage168)
setting.
%
•“Pass Through Source” can be set when “HDMI Control” is set to “On” or
“HDMI Pass Through” is set to “On”.
2 Power O Control
Links the power standby of this unit to external devices.
All (Default) : If power to a connected TV is turned o independently
of the input source, power to this unit is automatically
set to standby.
Video : With an input source being selected that is assigned either
“HDMI”, “COMP” or “VIDEO” (vpage 169), when you
turn the power of the TV o, power to this unit is automatically
set to standby.
O : This unit does not link with power to a TV.
Component Video Out
Set the zone to which the component video output connector is assigned.
MAIN ZONE (Default) : Assigns the component video output connector
to MAIN ZONE.
ZONE2 : Assigns the component video output connector to ZONE2.