Denon AVR-2307CI Home Theater System User Manual


 
Advanced Operation Advanced Operation
41
ENGLISH
ENGLISH
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
[VOLUME]
[ENTER]
[D H F G]
STATUS
[OFF]
[MODE]
ZONE2
[MEMORY]
[D H F G]
[ENTER]
STATUSZONE2
<ON/STANDBY>
Listening to music
Press [
DD HH
] to select the music file, then press [ENTER]
or [
GG
].
Press [
FF
] to return to the music menu screen.
Press [ENTER] or [
GG
].
Playback starts.
Manual search:
Press and hold in [
DD HH
] during playback.
DD
: Fast reverse
HH
: Fast forward
Track search:
Press [
DD HH
] during playback.
DD
: Move to beginning of previous track
HH
: Move to beginning of next track
Repeat play:
Press [MODE].
The mode switches as follows each time [MODE] is pressed.
RPT One: Single track repeat
RPT All: All track repeat
Pause:
Press [ENTER] during playback.
Press again to resume.
Stop:
Press [ENTER] for at least 2 seconds during playback.
1
2
Shuffle play:
Press [MEMORY].
The mode switches as follows each time [MEMORY] is pressed.
SFL Songs: Single track shuffle
SFL Albums: Album shuffle
The mode switches between the Browse mode and the Remote
mode if [MODE] is pressed for at least 2 seconds.
In the Remote mode, only [
DD HH FF GG
] and [ENTER] can be used.
•When STATUS is pressed during playback, the front panel display
switches between the title name, artist name and album name.
Depending on the iPod’s software version, it may not be possible to
operate the iPod from the AVR-2307CI. Use the latest version of the
software. Information on the latest version of the software can be
obtained on the Apple Computer website.
•If you do not want the on screen display to be displayed while
playing the iPod, set “Function/Mode Status” at “Setting the On
Screen Display” to “OFF” ( page 55).
•With the AVR-2307CI it is possible to display folder names and file
names on the screen like titles. The AVR-2307CI can display up to
64 characters, consisting of numbers, capital letters and small
letters. A “?” mark is displayed in place of non-compatible
characters.
Viewing still pictures and videos
(only for iPods equipped with the slideshow /
video function)
Press [MODE] for at least 2 seconds to switch from the
Browse mode to the Remote mode.
“Remote iPod” is displayed on the AVR-2307CI’s display.
Watching the iPod’s screen, press [
DD HH
] to select
“Photos” or “Video”, then press [ENTER] or [
GG
].
The iPod’s photo and video data are displayed on the monitor.
Use this procedure to view photo and video data stored on the iPod
on a monitor.
1
2
•To output photo or video data recorded on the iPod to the monitor,
the iPod’s “TV Out” setting (under “Video Settings”) must be set to
“ON”.
For details, refer to the iPod’s operating instructions.
Disconnecting the iPod
Press
<
ON/STANDBY
>
or [OFF] and set the AVR-
2307CI’s power to the standby mode.
The iPod can be disconnected after switching to a function other
than the one to which the iPod input is assigned.