Filter
Top Products
PageDefault settingSpeaker Setup
PageDefault settingAuto Setup
45
Advanced Setup – Part 2 Advanced Setup – Part 2
System setup items and default values (set upon shipment from the factory)
1. Auto Setup
1 Auto Setup
Set this to switch the surround back
channel’s power amplifier for Bi-amp use.
SURROUND BACK
8 ~ 11
2. Speaker Setup
1
3
Speaker
Config.
Crossover
Frequency
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE
for full-size, full-range) to automatically set the composition
of the signals output from the speakers and the frequency
response.
Sets the frequency (Hz) below which the bass sound of
the various speaker is to be output from the subwoofer.
Front Sp.
Large
Center Sp. Surround Sp. Subwoofer
Small SmallYes
Surround Back
Sp.
Small / 2sp
4
Channel
Level
This adjusts the volume of the signals output from the
speakers and subwoofer for the different channels in order
to obtain optimum effects.
SW Mode
Setup
This selects the subwoofer speaker for playing deep bass
signals.
5
LFE (Normal)
41
2
Delay Time
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and
subwoofer according to the listening position.
42, 43
43
43, 44
Power Amp
Assign.
Front
L & R
Center
Surround
L & R
Subwoofer
3.6 m 3.6 m 3.0 m3.6 m
Surround Back
L & R
3.0 m
41, 42
Front
L
Front
R
Center Surround R Subwoofer
0 dB 0 dB 0 dB 0 dB 0 dB
Surround L
0 dB
Surround
Back R
0 dB
Surround
Back L
0 dB
80 Hz
3. Input Setup
PageDefault settingInput Setup
36
Digital In
Assign.
This assigns the digital input terminals for the
different input sources.
Input
source
Digital
Inputs
CD DVD / VDP TV / DBS VCR-1
COAX1 OPT1 OPT2 COAX2
1
2
Ext In SW
Level
Sets the Ext. In Subwoofer terminal playback level.
Subwoofer = +15 dB
36
Input
Function
Level
The playback level can be corrected individually for the
different input sources.
TUNERPHONO CD
CDR /
TAPE
DVD /
VDP
TV / DBS
0 dB0 dB 0 dB 0 dB 0 dB 0 dB
3
VCR-2
0 dB
VCR-1
0 dB
V. AUX
0 dB
4
Function
Rename
The names of the different input source can be changed as
desired and displayed on the display.
37
5
Component
In Assign.
This assigns the color difference (component) video input
terminals for the different input sources.
37
6
Auto Tuner
Preset
FM stations are received automatically and stored in the
memory.
A1 ~ A8
B1 ~ B8
C1 ~ C8
D1 ~ D8
E1 ~ E8
87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 / 90.1 MHz
522 / 603 / 999 / 1404 / 1611 kHz, 90.1 / 90.1 / 90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
F1 ~ F8
G1 ~ G8
90.1 MHz
90.1 MHz
38
36
TUNERPHONO CD CDR DVD TV VCR-2VCR-1 V. AUX
CDR / TAPE
OPT3
DVD / VDP TV / DBS VCR-1 VCR-2
VIDEO1 VIDEO2 VIDEO3 OFF
V. AUX
OFF