Filter
Top Products
21
Basic Operation Basic Operation
DTS NEO:6 mode
1
Press the STANDARD button to select the DTS
NEO:6 mode.
DTS NEO:6DOLBY PLIIx
Play a program source.
3
Press the SURROUND PARAMETER button to
select the surround parameter mode.
5
Press the SURROUND PARAMETER button, and
press the CURSOR
DD
or
HH
button to select the
various parameters.
4
Turn the SELECT knob, and press the CURSOR
FF
or
GG
button to select the optimum mode for
the source.
STANDARD SELECT
SURROUND PARAMETER
FUNCTION INPUT MODE SURROUND MODE
SURROUND
PARAMETER
SURROUND
BACK
STANDARD
CURSOR
INPUT MODE
ENTER
FUNCTION
The mode switches as shown below each time the button
is pressed.
2
6
Turn the SELECT knob, and press the CURSOR
FF
or
GG
button to set the various surround
parameters.
When the surround parameters are set using the buttons on
the main unit, stop operating the buttons after completing
the settings. The settings are automatically finalized and the
normal display reappears after several seconds.
7
Press the ENTER button to finish the surround
parameter mode.
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
2 Surround parameters w
DTS NEO:6 Mode:
• Cinema:
This mode is optimum for playing movies. Decoding is
performed with emphasis on separation performance to
achieve the same atmosphere with 2-channel sources as with
6.1-channel sources.
This mode is effective for playing sources recorded in
conventional surround formats as well, because the in-phase
component is assigned mainly to the center channel (C) and the
reversed phase component to the surround (SL, SR and SB
channels).
• Music:
This mode is suited mainly for playing music. The front channel
(FL and FR) signals bypass the decoder and are played directly
so there is no loss of sound quality, and the effect of the
surround signals output from the center (C) and surround (SL,
SR and SB) channels add a natural sense of expansion to the
sound field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the
center channel in the DTS NEO:6 MUSIC mode has been
added.
Dolby Digital mode and DTS Surround
(only with digital input)
1
Select an input source set to digital (COAXIAL/
OPTICAL) ( page 36).
(Main unit) (Remote control unit)
Example: DVD
2
Press the INPUT MODE button to set the input
mode to “AUTO” or “DTS”.