Filter
Top Products
30
Basic Operation
RT (Radio Text)
“RT” appears on the display when radio text data is received.
Remote control unit
Operating DENON audio components
Advanced Operation
1
Set the MODE 1 switch to “AUDIO”.
2
Set the MODE 2 switch to the position for the
component to be operated (CD, CDR/MD or
TAPE).
3
Operate the audio component.
For details, refer to the component’s operating instructions.
While this remote control is compatible with a wide range of
infrared controlled components, it may be the case that
some component models cannot be operated with this
remote control.
6, 7 : Manual search (forward and reverse)
2 : Stop
1 : Play
8, 9 : Auto search (cue)
3 : Pause
DISC SKIP + : Switch discs (for CD changers only)
MODE 2
MODE 1
• TUNER can be operated when the switch is at “AUDIO”
position.
1
Set the input source to “TUNER”.
2
Press the RT button.
While receiving an RDS broadcast station, the text data
broadcast from the station is displayed.
To turn the display off, press the RT button again.
If no text data is being broadcast, “NO TEXT DATA” is
displayed.
2. Tape deck (TAPE) system buttons
6 : Rewind
7 : Fast-forward
2 : Stop
1 : Forward play
0 : Reverse play
A/B : Switch between decks A and B
3. Tuner system buttons
SHIFT : Switch preset channel range
CHANNEL +, – :Preset channel up/down
TUNING +, – :Frequency up/down
BAND : Switch between the AM
and FM bands
MODE : Switch between auto and mono
MEMORY :Preset memory
1. CD player (CD), CD recorder and MD recorder (CDR/MD)
system buttons