Denon AVR-2106 Stereo Amplifier User Manual


 
19
Basic Operation Basic Operation
2 Input mode display
In the AUTO mode
In the DIGITAL PCM mode
In the DIGITAL DTS mode
In the ANALOG mode
Depending on the input signal.
2 Input signal display
DOLBY DIGITAL
DTS
PCM
The “DIGITAL” indicator lights when
digital signals are being input
properly. If the “DIGITAL” indicator
does not light, check whether the
Digital In Assign. setup and
connections are correct and
whether the component’s power is
turned on.
NOTE:
The “DIGITAL” indicator will light when playing CD-ROMs
containing data other than audio signals, but no sound will
be heard.
Surround
Playing audio sources (CDs and DVDs)
2-channel playback modes
Press the STEREO/DIRECT/PURE DIRECT button on
the main unit or the DIRECT/PURE DIRECT button on
the remote control unit to select the PURE DIRECT
mode.
The AVR-2106 is equipped with 2-channel playback modes
exclusively for music.
Select the mode to suit your tastes.
2 PURE DIRECT mode
Use this mode to achieve good quality 2-channel sound while
watching images. In this mode, the audio signals bypass such
circuits as the tone circuit and display circuit and are transmitted
directly, resulting in good quality sound.
Press the STEREO/DIRECT/PURE DIRECT button on
the main unit or the DIRECT/PURE DIRECT button on
the remote control unit to select the DIRECT mode.
2 DIRECT mode
Use this mode to achieve good quality 2-channel sound while
watching images. In this mode, the audio signals bypass such
circuits as the tone circuit and are transmitted directly, resulting
in good quality sound.
Press the STEREO/DIRECT/PURE DIRECT button on
the main unit or the STEREO button on the remote
control unit to select the STEREO mode.
2 STEREO mode
Use this mode to adjust the tone and achieve the desired sound
while watching images.
STANDARD SELECT
SURROUND PARAMETER
STEREO/DIRECT/PURE DIRECT
SURROUND
PARAMETER
STEREO
STANDARD
DIRECT/
PURE DIRECT
CURSOR
ENTER