Denon AVR-2106 Stereo Amplifier User Manual


 
Advanced Setup – Part 1
35
Use System Setup to customize a variety of settings to suit your listening environment.
For the contents of a system menu and the initial setting of this unit ( page 45, 46).
*Input Setup
You can change the settings using the buttons on the remote control unit.
[ On-screen display ]
[ Display ]
2
3
4
6
*Digital In
*COAX1 CD
*Exit
CURSOR
MODE 1
SETUP
ENTER
Navigating through the System Setup Menu
The AVR-2106 is equipped with an intuitive and easy-to-understand on-screen display, and is
equipped with an alphanumeric front panel display that can also be used to check and adjust
settings. We recommend that you use the on-screen display when you make system adjustments.
Some representative front display and on-screen display examples are shown below.
On-screen display and front display
Advanced Setup – Part 1
[ On-screen display ]
Top menu
Main menu
[ Front display ]
*Auto Setup
Top menu
Screen title
No.
Sub-menu title
*Speaker Setup
To select a menu, press
the CURSOR
DD
or
HH
button.
*Digital In
Main menu
Screen title
No.
Sub-menu title
*AutoSet <Start
Press the CURSOR
FF
button to execute.
Currently selected line
*COAX1 CD
Current setting
Currently selected line
1
Set the MODE 1 switch to “AUDIO”.
2
Press the SETUP button to display
the “System Setup” menu.
Press the CURSOR
DD
or
HH
button
to select the menu, then press the
ENTER button.
3
Press the ENTER button to enter
the selected menu.
4
To change a setting, first select it
pressing the CURSOR
DD
or
HH
button, and then change the
setting pressing the CURSOR
FF
or
GG
button.
5
Press the ENTER button to
confirm the new settings.
6
Press the SETUP button to return
to the “System Setup” menu and
again to return to the main screen.