Filter
Top Products
Installing the VoIP Ceiling Speaker
Restore the Factory Default Settings
Operations Guide 930095K CyberData Corporation
23
Figure 2-12. Reboot System Section
2. Click Reboot. A normal restart will occur as per Section 2.2.2.1, "Status LED".
2.6 Restore the Factory Default Settings
When troubleshooting configuration problems, it is sometimes convenient to restore the device to a
known state.
Each speaker is delivered with factory set default values for the parameters indicated in Table 2-10.
Use the RT
FM switch on the speaker face to restore these parameters to the factory default settings.
Note Whe
n you use the RTFM switch, the factory default settings are restored for only the
parameters indicated in Table 2-10. The other parameters in the current speaker
configuration will remain unchanged.
Table 2-10. Factory Default Settings
Parameter Factory Default Setting
IP Addressing static
IP Address 192.168.3.10
Web Access Username admin
Web Access Password admin
Subnet Mask 255.255.255.0