CyberData 930095K Speaker User Manual


 
CyberData Corporation 930095K Operations Guide
Installing the VoIP Ceiling Speaker
Speaker Setup
6
2.2 Speaker Setup
Set up and configure each speaker before you mount it.
CyberData delivers each speaker with the following factory default values:
2.2.1 Connect Power to the Speaker
Figure 2-1 and Figure 2-2 illustrates how to connect the VoIP Ceiling Speaker to a 802.3af compliant
ethernet hub (Figure 2-1) or a PoE Injector (Figure 2-2) via a Cat 5 Ethernet Connector.
Note If
a 802.3af compliant ethernet hub is not available, you will need a PoE Injector, part
#010867A (ordered separately). A PoE Injector is a power supply solution for those who
have a standard hub.
Table 2-2. Factory Default Settings—Default of SIP
Parameter Factory Default Setting
SIP/MGROUPS SIP
IP Addressing static
IP Address 192.168.3.10
Web Access Username admin
Web Access Password admin
Subnet Mask 255.255.255.0
Default Gateway 192.168.3.1
Figure 2-1. 802.3af Compliant Ethernet Hub
Figure 2-2. PoE Injector
PoE Injector (Part #010867A)
Non PoE Hub