Filter
Top Products
Installing the VoIP Ceiling Speaker
Configure the Speaker Parameters
Operations Guide 930095K CyberData Corporation
9
2.2.4 Adjust the Volume
To adjust the speaker volume, turn the Vo l um e dial (Figure 2-5) on the speaker face.
Figure 2-5. Volume Control
2.3 Configure the Speaker Parameters
To configure the speaker online, use a standard web browser.
Configure each speaker and verify its operation befor
e you mount it. When you are ready to mount a
speaker, refer to
Chapter A, “Mounting the Speaker” for instructions.
All speakers are initially configured with the following default IP settings:
When configuring more than one speaker, attach the speakers to the network and configure one at a
time
to avoid IP address conflicts.
Volume control
Table 2-3. Factory Default Settings
Parameter Factory Default Setting
SIP/MGROUPS SIP
IP Addressing static
IP Address 192.168.3.10