Filter
Top Products
Installing the Singlewire-enabled Speaker
Configure the Speaker Parameters
Operations Guide 930320C CyberData Corporation
22
2.4.1 Reboot the Singlewire-enabled Speaker
To reboot a Singlewire-enabled Speaker, log in to the web page as instructed in Section 2.3.1, "Log in
to the Configuration Home Page".
1. Click Update Firmware to open the Upgrade Firmware page (Figure 2-15).
Figure 2-15. Reboot System Section
2. Click Reboot. A normal restart will occur and you will see the following Reboot page.
Figure 2-16. Reboot Page
Reboot