Filter
Top Products
Installing the Singlewire-enabled Speaker
Device Configuration
Operations Guide 930320C CyberData Corporation
7
2.2 Device Configuration
Set up and configure each speaker before you mount it.
CyberData delivers each speaker with the following factory default values:
2.2.1 Connect Power to the Speaker
Figure 2-4 through Figure 2-6 illustrates how to connect power to the Singlewire-enabled Speaker.
2.2.1.1 Singlewire-enabled Speaker to a 802.3af Compliant PoE Switch
Figure 2-4 illustrates how to connect the Singlewire-enabled Speaker to a 802.3af compliant PoE
switch via a Cat 5 Ethernet cable.
Figure 2-4. Singlewire-enabled Speaker to a 802.3af Compliant PoE Switch
Table 2-2. Factory Network Default Settings—Default of Network
Parameter Factory Default Setting
IP Addressing DHCP
IP Address
a
a. Default if there is not a DHCP server present.
10.10.10.10
Web Access Username admin
Web Access Password admin
Subnet Mask
a
255.0.0.0
Default Gateway
a
10.0.0.1
802.3af Switch Class “0”
Cat 5 Ethernet cable
Speaker