Filter
Top Products
Installing the Singlewire-enabled Speaker
Device Configuration
Operations Guide 930320C CyberData Corporation
15
2.2.6 How to Set the Factory Default Settings
2.2.6.1 RTFM Switch
When the speaker is operational and linked to the network, use the Reset Test Function
Management (RTFM) switch (
Figure 2-12) on the speaker face to set the factory default settings.
Figure 2-12. RTFM Switch
To set the factory default settings:
1. Press and hold the RTFM switch for more than five seconds.
2. The speaker announces that it is restoring the factory default settings.
Note The speaker will use DHCP to obtain the new IP address (DHCP-assigned address or
default to 10.10.10.10 if a DHCP server is not present).
RTFM switch