CyberData 11103 Speaker User Manual


 
Installing the Singlewire-enabled Speaker
Configure the Speaker Parameters
Operations Guide 930320C CyberData Corporation
18
3. On the Home Page, review the setup details and navigation buttons described in Table 2-4.
Table 2-4. Home Page Overview
Web Page Item Description
Device Settings
Change Username Type in this field to change the username (25 character limit).
Change Password Type in this field to change the password (19 character limit).
Re-enter Password Type the password again in this field to confirm the new password
(19 character limit).
Current Settings
Serial Number Shows the device serial number.
Mac Address Shows the device Mac address.
Firmware Version Shows the current firmware version.
IP Addressing Shows the current IP addressing setting (DHCP or Static).
IP Address Shows the current IP address.
Subnet Mask Shows the current subnet mask address.
DNS Server 1 Shows the current DNS Server 1 address.
DNS Server 2 Shows the current DNS Server 2 address.
Boot Time Shows the boot time.
Current Time Shows the current time.
InformaCast Server Shows the InformaCast Server IP address.
Configuration File Shows the configuration file.
B’casts Accepted Shows the number of B’casts accepted.
B’casts Rejected Shows the number of B’casts rejected.
B’casts Rejected Shows the number of active B’casts.
RTP Packets Rx’d Shows the number of RTP packets Rx’d.
Clock Status Shows the current clock status.
Clock Firmware Shows the current clock firmware version.
Link to the Home page.
Link to the Update Firmware page.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.