Filter
Top Products
Installing the Singlewire-enabled Speaker
Configure the Speaker Parameters
Operations Guide 930320C CyberData Corporation
20
6. Click the Update Firmware button to open the Upgrade Firmware page. See Figure 2-14.
Figure 2-14. Firmware Upgrade Page
Note Figure 2-14 shows the factory default settings.
7. Enter the IP address of your TFTP server into the TFTP Server IP parameter field.
8. Enter the firmware filename of the file to be uploaded into the New Filename parameter field.
For example, kernel filename 201-image-spk-sip.bin.
9. Click Upload File.
Note This starts the upload process. Once the Singlewire-enabled Speaker has uploaded the file,
the Uploading Firmware countdown page appears, indicating that the firmware is being
written to flash. The Singlewire-enabled Speaker will automatically reboot when the upload
is complete. When the countdown finishes, the Upgrade Firmware page will refresh. The
uploaded firmware filename should be displayed in the system configuration (indicating
successful upload and reboot).