Filter
Top Products
Installing the Singlewire-enabled Speaker
Configure the Speaker Parameters
Operations Guide 930320C CyberData Corporation
17
2.3.1 Log in to the Configuration Home Page
1. Open your browser to the Singlewire-enabled Speaker IP address. This can be found within the
InformaCast Server Test Menu.
Note If the network does not have access to a DHCP server, the device will default to an IP
address of 10.10.10.10.
Note Make sure that the PC is on the same IP network as the Singlewire-enabled Speaker.
2. When prompted, use the following default Web Access Username and Web Access Password
to access the Home Page (
Figure 2-13):
Web Access Username: admin
Web Access Password: admin
Figure 2-13. Home Page