Filter
Top Products
Installing the Singlewire-enabled Speaker
Configure the Speaker Parameters
Operations Guide 930320C CyberData Corporation
16
2.3 Configure the Speaker Parameters
To configure the speaker online, use a standard web browser.
Configuration of the speaker is taken care of by the InformaCast server. If an InformaCast server can
not be found, the speaker will return to factory defaults as shown in
Table 2-3.
Table 2-3. Factory Network Default Settings—Default of Network
Parameter Factory Default Setting
IP Addressing DHCP
IP Address
a
a. Default if there is not a DHCP server present.
10.10.10.10
Web Access Username admin
Web Access Password admin
Subnet Mask
a
255.0.0.0
Default Gateway
a
10.0.0.1