Filter
Top Products
Crestron HTT-B10X infiNET™ TableTop Controller
NOTE: The HTT-B10X itself does not function as a repeater.
Color and Engraving Options
The HTT-B10X is available in either black or white, with an attractive brushed
aluminum inlay. Custom backlit engraving is available for each individual column of
five buttons.
Specifications
Specifications for the HTT-B10X are listed in the following table.
HTT-B10X Specifications
SPECIFICATION DETAILS
Backlight
White LED light pipe backlight for button
engraving; software adjustable intensity,
auto-dimmable
Movement Sensor
Vibration sensor wakes unit from sleep
mode if operating on battery
Low Battery Warning Beep sound indicates low battery condition
Wireless
1
RF Transceiver
2-way RF, 2.4 GHz ISM Channels 11-26
(2400 to 2483.6 MHz), IEEE 802.15.4
compliant
RF Output Power 100 mW
Range (typical)
150 feet (46 meters) indoor,
250 feet (76 meters outdoor;
Subject to site specific conditions; range is
increased by adding additional devices or
C2N-MNETRPT repeater (sold separately)
Power Requirements
Batteries
(2) AA alkaline batteries required, estimated
eight months usage under normal operation
12 VDC 6 Watts (0.5 Amps) @ 12 Volts DC
Power Supply
HTT-B10X:
120 Volts AC, 60 Hz
(PW-1205 included)
HTTI-B10X:
230 Volts AC, 50 Hz
(PW-1205RU included)
Default MNET ID
2
01
Minimum 2-Series Control
System Update File
3, 4
Version 3.155.1240 or later
Minimum infiNET Gateway
Version
Firmware version 2.001.0003 or later
Environmental
Temperature 32º to 104º F (0º to 40º C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 3.4 BTU/Hr
(Continued on following page)
Operations Guide – DOC. 6583B infiNET™ TableTop Controller: HTT-B10X • 3