Filter
Top Products
InfiNET™ TableTop Controller Crestron HTT-B10X
Change Network ID
Release Gateway Connection
At times, it may be desirable to unacquire an HTT-B10X from a previously acquired
gateway. To unacquire the HTT-B10X from the C2N-MNETGW gateway, while in
Setup mode, press and hold button #2 for 10 seconds. The LED next to button #2
will blink twice at the 10 second threshold when the button is held.
Manner Mode
When operating from the 12 Volt power pack, the HTT-B10X has a feature called
Manner mode, which causes the unit to shut off its backlight and LED feedback
indicators after some period of inactivity. This mode may be desirable in applications
such as a bedroom or darkened home theater, where the constant light could become
distracting.
To configure Manner mode, perform the following procedure:
1. Enter Setup mode (refer to “Setup Mode” on page 10).
2. Use button #1 (refer to illustration on page 10) to enable/disable Manner
mode. The LED feedback indicator next to button #1 will light when
Manner mode is enabled.
NOTE: The LED feedback indicator next to button #1 will indicate Manner mode
status only while the HTT-B10X is in Setup mode.
Local Button Feedback
Use button #3 (refer to illustration on page 10) to enable/disable local button
feedback. Local button feedback provides positive confirmation for any button press.
When enabled, the LED next to the button being pressed will light for as long as the
button is pressed.
When the button is released, feedback is governed by the program. When local
button feedback is disabled (the default), button feedback is always governed by the
program.
12 • infiNET™ TableTop Controller: HTT-B10X Operations Guide – DOC. 6583B