Filter
Top Products
32
status
e primary function of the status screen is to provide information about the
current operating status of the CAP-2100. It also provides access to version
info screen, which displays information about the unit’s software, and the
sensors screen, which displays information from the internal sensors about the
temperature and input power.
version info e version info button on the status screen takes you to the version
information screen, which displays information on various pieces of software
used by your CAP-2100. If you ever have occasion to call our technical support
people to ask a question not covered in this manual, they may want to know
precisely what version of software your unit is running. Having this information
available will help enable them to give you the best possible service.
sensors e sensors button on the status screen takes you to the sensors screen, which
displays information about several internal sensors within the CAP-2100. It is
unlikely you might ever need the sensor information, unless directed to do so by
a customer service representative at Classé in order to help troubleshoot some
unexpected problem.
CAN-Bus Classé’s Controller Area Network, or CAN-Bus, opens the way to a new level
of interaction between our Delta range of amplifi ers, preamps, processors and
source components. When the CAP-2100 is connected with CAN-Bus, the
diff erent elements of a Delta series system are in constant communication,
creating a “global” network that delivers system wide status information and
shared operational features, all through the touchscreen display.
features CAN-Bus will allow a single Delta series touchscreen to:
• Display status information for every connected unit, including
amplifi ers which do not have a touchscreen display.
• Create a “PlayLink” that allows an SSP or Preamp to automatically
switch to the correct input when a Delta series source component
starts playback.
• Adjust the global system brightness.
• Confi gure the entire system to go in and out of standby at the
touch of a button and also bring individual components in and
out of standby.
• Mute any connected unit.