Filter
Top Products
31
remote Fkeys
e remote control supplied with the CAP-2100 has four function keys (Fkeys)
that allow you to have instant, easy access to specifi c system functions that might
otherwise be buried in a menu somewhere.
For example, if you use the balance control frequently, you may want to consider
programming one of the Fkeys to take you straight to that screen. Doing so will
save you having to access the control menu, followed by pressing the balance
button (which might be hard to see from across the room).
e remote Fkey menu has four buttons, one each for the four Fkeys on your
remote control. Pressing any of these buttons on the LCD touchscreen takes you
to a subordinate, scrolling list of possible functions for that particular Fkey.
Selecting the one you want is as simple as scrolling through the list (by touching
either the up or down arrows on the right), and then touching the specifi c
function in the list that you want that Fkey to perform.
cautionary note on Fkey use Note that all Classé remote controls provide these same four Fkeys, so that you
need not worry about which remote you happen to pick up. us F1 on the
integrated amplifi er’s remote control sends the same infrared signal as F1 on the
CD player’s remote control.
While this is intended to minimize confusion amongst diff erent remotes (since
this aspect of them will all perform identically), you should take care when
assigning diff erent functions on diff erent components to the same Fkey. Doing
so would result in two components doing two diff erent things at once, in
response to a single press of a button on the remote control. is can sometimes
be useful. As an example, F1 could set the integrated amplifi er to the CD input,
and also set the CD player to Play, both from the press of a single Fkey.