Filter
Top Products
TA0.1 Amplier
5
www.clarksynthesis.com
PRODUCT INTRODUCTION
OVERVIEW OF THE AMPLIFIER
The TA0.1 amplier is designed exclusively for use with Clark Synthesis transducers. This amplier
incorporates the latest digital technology and provides features not available on many ampliers. Please read
this manual in its entirety so you can get the maximum enjoyment from your Clark Synthesis product(s).
USING THIS AMPLIFIER WITH A CLARK SYNTHESIS TRANSDUCER
The TA0.1 amplier works with all Clark Synthesis transducers. This manual outlines how to use this amplier
with our transducers.
CAUTION: This amplier is designed to provide power to one (1) transducer.
Please note, the TA0.1 can provide more continuous power than the transducer can handle. Why do we
do this? Special effects audio signals often contain peaks that require extra power to be delivered to the
transducer. This amplier will supply those peaks without damaging the transducer, providing you, the user,
with a true Tactile Sound experience.
FEATURES
The Clark Synthesis TA0.1 Amplier has the following features:
Class D design for powerful, clean sound•
All-metal cabinet with pre-drilled holes in mounting plate and remote control interface box.•
Crisp, clean, and compact body design•
Wired remote control for “in-chair” adjustments•
Built-in Crossover Control that enables control of the cutoff point from • 40 Hz to 400 Hz
Bypass control that disables the Crossover Control, allowing the amplier to reproduce full-frequency audio•
Front LED that indicates the amplier is connected to AC power•
• Auto/On saves power by turning the amplier stage on only when an audio signal is present
Powered • loop-through allows you to connect multiple ampliers together to a single audio source
Stereo inputs allow you to connect the amplier to multiple sources. The audio is automatically combined •
inside the amplier.
IEC-601 • Connector allows you to use a power cord other than the power cord supplied. This is especially
helpful if you live in a country that requires a different AC plug.
Amplier automatically runs on AC power from 100 to 240 VAC, 50/60 Hz•
The audio input section works with high-level and low-level line signals. This feature permits the amplier •
to work with studio-level and consumer-level audio signals
• 5-way binding posts for connecting the transducer wires
!