www.clarksynthesis.com
TA0.1 Amplier
4
SAFETY INSTRUCTIONS
READ THESE INSTRUCTIONS.1.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.2.
HEED ALL WARNINGS.3.
FOLLOW ALL INSTRUCTIONS.4.
DO NOT USE THIS AMPLIFIER NEAR WATER.5.
CLEAN ONLY WITH A DRY CLOTH.6.
DO NOT BLOCK ANY VENTILATION OPENINGS. INSTALL IN ACCORDANCE WITH THE 7.
MANUFACTURER’S INSTRUCTIONS.
DO NOT INSTALL NEAR HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS, STOVES, OR 8.
OTHER EQUIPMENT.
DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED OR GROUNDING TYPE PLUG- 9. A
polarized plug has two blades, with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not t into
your outlet, consult an electrician for replacement of the obsolete outlet.
PROTECT THE POWER CORD FROM BEING WALKED ON OR PINCHED, PARTICULARLY AT THE 10.
POINTS NEAREST THE OUTLET AND WHERE THE CORD ENTERS THE AMPLIFIER.
ONLY USE ATTACHMENTS OR ACCESSORIES SPECIFIED BY THE MANUFACTURER.11.
USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE SPECIFIED BY THE 12.
MANUFACTURER OR SOLD WITH THE AMPLIFIER. When a cart is used, use caution when moving the cart
to avoid damaging the amplier.
UNPLUG THE AMPLIFIER DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG 13.
PERIODS OF TIME.
REFER ALL SERVICING TO QUALIFIED PERSONNEL. 14. Servicing is required when the amplier has been
damaged in any way, such as the power supply cord has been damaged, liquid has been spilled/objects have fallen
into the amplier, the amplier has been exposed to rain or moisture, the amplier does not operate normally, or the
amplier has been dropped.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE 15.
THIS AMPLIFIER TO RAIN OR MOISTURE.
DO NOT EXPOSE TO DRIPPING OR SPLASHING. DO NOT PLACE OBJECTS FILLED WITH 16.
LIQUID, SUCH AS VASES, ON THIS AMPLIFIER.
TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE TOP OR BOTTOM COVERS. NO USER 17.
SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE 18.
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE. THE MAINS PLUG OF THE POWER
SUPPLY CORD SHALL REMAIN READILY OPERABLE.
THE EXCLAMATION POINT WITHIN THE EQUILATERAL TRIANGLE IS INTENDED 19.
TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS.
THE LIGHTNING BOLT TRIANGLE IS INTENDED TO ALERT THE USER TO THE RISK 20.
OF ELECTRIC SHOCK.
SPECIAL SAFTEY CONSIDERATION FOR THE AQUASONIC SWIMMING POOL 21.
SPEAKER: WHEN USING THE TA0.1 AMPLIFIER WITH THE CLARK SYNTHESIS AQUASONIC
SWIMMING POOL SPEAKER, WE RECOMMEND THE FOLLOWING:
- The amplier must be plugged into a GFI-protected outlet.
- Use an isolation transformer. Contact Clark Synthesis for more information.
!
!