Filter
Top Products
XDZ716 1918 XDZ716
CD Changer Operations
Top function
The top function plays from the first track (track
No. 1) of the disc.
● When playing a disc 1 to 6
Press Direct button 9 (1 to 6) with the same
number as the CD playing.
● When playing a disc 7 to 12 (only when a
12 disc CD changer is used.)
Press and hold for 1 second or longer Direct but-
ton 9 (7 to 12) with the same number as the CD
playing.
∗ If a CD is not loaded in a slot of magazine, press-
ing Direct button 9 corresponding to its disc num-
ber is invalid.
Scan play
The scan play locates and plays the first 10
seconds of each track on a disc automatically.
This function continues on the disc until it is can-
celled.
∗ The scan play is useful when you want to select a
desired track.
1. Press SCN button 5 to start track scanning.
“SCN” lights in the display.
2. To cancel the scan play, press SCN button 5
again. “SCN” goes off from the display and
the current track continues to play.
Disc scan play
The disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected CD changer. This function
continues automatically until it is cancelled.
∗ The disc scan play is useful when you want to se-
lect a desired CD.
1. Press and hold SCN button 5 for 1 second
or longer. “DISC” and “SCN” light in the dis-
play and the disc scan play starts.
2. To cancel the disc scan play, press SCN button
5 again. “DISC” and “SCN” go off from the dis-
play and the current track continues to play.
Repeat play
The repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
1. Press RPT button 6. “RPT” lights in the dis-
play and the current track is repeated.
2. To cancel the repeat play, press RPT button
6 again. “RPT” goes off from the display and
normal play resumes.
Disc repeat play
After all the tracks on the current disc have been
played, the disc repeat play automatically replays
the current disc over from the first track. This
function continues automatically until it is can-
celled.
1. Press and hold RPT button 6 for 1 second
or longer. “DISC” and “RPT” light in the dis-
play and the disc repeat play starts.
2. To cancel the disc repeat play, press and hold
RPT button 6 again. “DISC” and “RPT” go
off from the display and normal play resumes
on the current track.
Random play
The random play selects and plays individual
tracks on the disc in no particular order. This
function continues automatically until it is can-
celled.
1. Press RDM button 7. “RDM” lights in the dis-
play and the random play begins.
2. To cancel the random play, press RDM but-
ton 7 again. “RDM” goes off from the display
and normal play resumes.
Disc random play
The disc random play selects and plays individual
tracks or discs automatically in no particular
order. This function continues automatically until
it is cancelled.
1. Press and hold RDM button 7 for 1 second
or longer. “DISC” and “RDM” light in the dis-
play and the disc random play starts.
2. To cancel the disc random play, press and hold
RDM button 7 again. “DISC” and “RDM” go
off from the display and normal play resumes
from the current track.
CD Changer Operations
8. OPERATIONS OF ACCESSORIES
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a total
of 2 changers (MD and/or CD).
Press FNC button 3 and select the CD changer
mode to start play. If 2 CD changers are
connected, press FNC button 3 to select the
CD changer for play.
∗ If “NO MAGAZINE” appears in the display, insert
the magazine into the CD changer. “DISC CHECK”
appears in the display while the player loads
(checks) the magazine.
∗ If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
CAUTION
CD-ROM discs and CD-R discs cannot be
played in the CD changer.
Pausing play
1. Press Play/pause button & to pause play.
“PAUSE” appears in the display.
2. To resume play, press Play/pause button &
again.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
1. Press DISP button # to display the title.
2. Each time you press and hold DISP button
# for 1 second or longer, the title display
changes in the following order:
User title (disc) ➜ CD-text title (disc) ➜ Artist
name ➜ CD-text title (track) ➜ user title
(disc)...
Note:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO-TITLE” appears in the
display.
Procedure to scroll a title
Set “AUTO SCROLL” to “ON” or “OFF”. (The fac-
tory default setting is “ON”. See p.17.)
● When set to “ON”
The title is automatically kept scrolling.
● When set to “OFF”
Press the TITLE button 2 to scroll the title.
Selecting a CD
Each Direct button 9 corresponds to a disc
loaded into the magazine.
● Selecting a disc from 1 to 6
Press the corresponding Direct button 9 (1 to
6) to select the desired disc.
● Selecting a disc from 7 to 12 (only when a
12 disc CD changer is used.)
Press and hold Direct button 9 (7 to 12) for 1
second or longer to select the desired disc.
∗ If a CD is not loaded in a slot of magazine, press-
ing Direct button 9 corresponding to its disc num-
ber is invalid.
Selecting a track
● Track-up
1. Press the right side of SEARCH button % to
move ahead to the beginning of the next track.
2. Each time you press the right side of SEARCH
button %, the track advances ahead to the
beginning of the next track.
● Track-down
1. Press the left side of SEARCH button % to
move back to the beginning of the current
track.
2. Press the left side of SEARCH button % twice
to move to the beginning of the previous track.
Fast-forward/fast-backward
● Fast-forward
Press and hold the right side of SEARCH button
% for 1 second or longer.
● Fast-backward
Press and hold the left side of SEARCH button
% for 1 second or longer.