Filter
Top Products
44 VXZ646
English
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for a desired TV station in memory.
1. Press the [P/A] button.
2. When the desired station is found, press the
[P/A] button again to remain tuned to that
station.
Note:
• Do not press and hold the [P/A] button for 2
seconds or longer. Doing so will trigger the auto
store function and start storing stations into
memory.
Setting up the TV type
Set the TV type to NTSC, PAL, MULTI.
1. Press the [A] button to switch to the
adjustment selection display.
2. Press the [a] or [d] button to select “TV
TYPE”.
3. Turn the [ROTARY] knob clockwise or
counterclockwise to select the setting. Each
time you turn the [ROTARY] knob, the setting
changes in the following order:
MULTI ➜ NTSC ➜ PAL
4. Press the [A] button to return to the previous
mode.
Setting the TV area
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press the [A] button to switch to the
adjustment selection display.
2. Press the [a] or [d] button to select “TV
AREA E”.
3. Press the [ ] button.
4. Turn the [ROTARY] knob clockwise or
counterclockwise to select the reception
area.
5. Press the [ ] button.
6. Press the [A] button to return to the previous
mode.
The above operations are required when a TV
tuner other than TTX7501z is connected.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Press the [A] button to switch to the
adjustment selection display.
2. Press the [a] or [d] button to select “TV
DIVER”.
3. Turn the [ROTARY] knob clockwise to set to
“ON” or counterclockwise to set to “OFF”.
ON:
Sets the diver setting to ON.
OFF:
Sets the diver setting to OFF.
4. Press the [A] button to return to the previous
mode.
TV Operations