Filter
Top Products
VXZ646 39
English
Operations Common to Each Mode
Setting the method for title
scroll
Set how to scroll in CD-TEXT, MP3 Title while in
the CD changer mode.
∗ The factory default setting is “ON”.
1. Press the [A] button to the adjustment
selection display.
2. Press the [a] or [d] button to select
“AUTO SCRL”.
3. Turn the [ROTARY] knob clockwise or
counterclockwise and select “ON” or “OFF”.
ON:
To scroll automatically.
OFF:
To scroll just 1 time when the title was
changed or the [A] button was pressed and
hold for 1 second or longer.
4. Press the [A] button to return to the previous
mode.
Dimmer control
You can set the dimmer control “ON” or “OFF”.
∗ The factory default setting is “ON”.
1. Press the [A] button to switch to the
adjustment selection display.
2. Press the [a] or [d] button to select
“DIMMER”.
3. Turn the [ROTARY] knob clockwise to “ON”
or counterclockwise to “OFF”.
4. Press the [A] button to return to the previous
mode.
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗ The factory default setting is “8”. (Adjustment
level: 1 to 16)
1. Press the [A] button to switch to the
adjustment selection display.
2. Press the[a] or [d] button to select
“CONTRAST”.
3. Turn the [ROTARY] knob clockwise or
counterclockwise to adjust the contrast.
4. Press the [A] button to return to the previous
mode.
Setting the Subwoofer
∗ The factory default setting is “SUB-W ON”.
1. Press the [A] button to switch to the
adjustment selection display.
2. Press the [a] or [d] button and select
“SUB-WOOFER”.
3. Turning the [ROTARY] knob clockwise or
counterclockwise and select “ON” or “OFF”.
4. Press the [A] button to return to the previous
mode.
Setting LOW PASS FILTER
∗ This function can be adjusted only when the
subwoofer output is set to “ON”. For details on
“Setting the Subwoofer”, refer to the section
“Operations Common to Each Mode” of each
owner’s manual.
∗ The factory default setting is “LPF THRGH”.
1. Press the [A] button to switch to the
adjustment selection display.
2. Press the [a] or [d] button to select “SUB-
W LPF”.
3. Turn the [ROTARY] knob clockwise or
counterclockwise to select the setting. Each
time you turn the [ROTARY] knob, the setting
changes in the following order:
LPF THRGH ➜ LPF 50Hz ➜ LPF 80Hz ➜
LPF 120Hz
4. Press the [A] button to return to the previous
mode.
Selecting the external
amplifier
Set AMP CANCEL to “ON” (internal amplifier use
OFF) when an external amplifier is connected
and the internal amplifier is not used.
∗ The factory default setting is “OFF”.
1. Press the [A] button to switch to the
adjustment selection display.
2. Press the [a] or [d] button and select
“AMP CANCEL”.
3. Turning the [ROTARY] knob clockwise or
counterclockwise and select “ON” or “OFF”.
ON:
Use with connecter AMP.
OFF:
Use with inside AMP.
4. Press the [A] button to return to the previous
mode.