Filter
Top Products
VXZ646 25
English
Listening to a CD
∗ This unit is a CD TEXT compatible model.
This unit supports the display of the DISC TITLE,
TRACK TITLE and ARTIST of the CD TEXT.
Note:
• This unit supports only CD TEXT in English. Also,
some character data may not be reproduced
properly on the monitor.
After inserting a disc, the play mode is
automatically engaged.
• Example showing CD TEXT display.
Stopping playback
Press and hold the [ ] button for 1 second or
longer during playback.
∗ Playback stops.
■ To resume playback
• Press the [ ] button, and playback
resumes from the scene where playback is
stopped.
Pausing playback
Press the [ ] button during playback.
∗ Playback pauses.
■ To resume playback
• Press the [ ] button again, and
playback resumes.
Skipping a track (searching)
Press the TRACK up [d]/ TRACK down [a]
buttons.
*Tracks are skipped, as many as the times
the button is pressed, and playback starts.
• Press the [d] button, and playback starts
from the beginning of the next track.
• Press the [a] button, and playback starts
from the beginning of the current track.
When this button is pressed again within
about 1 second, playback starts from the
beginning of the previous track.
Fast forward and Fast rewind
Press and hold the Fast forward [d] button or
Fast rewind [a] button during playback.
∗ Press and hold the button, and the
playback speed becomes 4-time faster first
and then 8-time faster 3 seconds later.
Release the button, and the normal speed
is restored.
Searching with a track
number
This operation allows searching using the track
numbers recorded on the CDs.
∗ This function can only be used from the remote
control unit.
1. Press the [SEARCH MODE] button during
playback.
2. Input the number of the track that you want to
play back with the ten-key buttons (0 to 9).
•To input the track number “12”, press “1” of
the ten-key buttons and then “2”.
3. Press the [ENT] button on the remote control
unit.
∗ Playback starts from the track of the input
track number.
• If the input track number does not exist or
searching with a track number is not
allowed, the following message appears to
invalidate the input.
Scan playback
This operation scans and plays back all tracks
recorded on the disc, the first 10 seconds for
each.
Press the [SCN] button.
∗ Press the [SCN] button again, and scan
playback is turned off.
Press “1”.
Press “2”.