Filter
Top Products
38 VXZ646
English
Entering MESSAGE
INFORMATION
When the use of the message is selected for the
screen saver setting, you can change the
contents of the message.
∗ Up to 30 characters can be entered.
∗ The factory default setting is “Welcome to
Clarion”.
1. Press the [A] button to switch to the
adjustment selection display.
2. Press the [a] or [d] button to select “MSG
INPUT E“.
3. Press the [ ] button.
4. Press the [BND] button to clear the old
message.
5. Press the [a] or [d] button to move the
cursor.
6. Press the [DISP] button to select a character.
Each time you press the [DISP] button, the
character changes in the following order:
Capital letters ➜ Small letters ➜ Numbers
and Symbols ➜ Umlaut ➜ Capital letters...
7. Turn the [ROTARY] knob to select the
desired character.
8. Repeat step 5 to 7 to enter up to 30
characters for message.
9. Press and hold the [ ] button for 2
seconds or longer to store the message in
memory and cancel input message.
10. Press the [A] button to return to the previous
mode.
Message display
When the unit is powered on or off, a message is
displayed. The user can turn this message
display ON or OFF.
∗ The factory default setting is “ON”.
1. Press the [A] button to switch to the
adjustment selection display.
2. Press the [a] or [d] button to select
“MESSAGE”.
3. Turn the [ROTARY] knob clockwise or
counterclockwise to set the message display
ON or OFF.
4. Press the [A] button to return to the previous
mode.
Operations Common to Each Mode
Setting the clock
1. Press the [A] button to switch to the
adjustment selection display.
2. Press the [a] or [d] button to select
“CLOCK E”.
3. Press the [ ] button.
4. Press the [a] or [d] button to select the
hour or the minute.
5. Turn the [ROTARY] knob clockwise or
counterclockwise to set the correct time.
∗ The clock is displayed in 12-hour format.
6. Press the [ ] button to store the time into
memory.
7. Press the [A] button to return to the previous
mode.
Note:
•You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the
car’s battery or take out this unit, the clock is reset.
While setting the clock, if another button or
operation is selected, the clock set mode is
canceled.
Turning the screen saver
function on or off
This unit is provided with the screen saver
function which allows you to show various kinds
of patterns and characters in the Operation
Status indication area of the display in a random
order. You can turn on and off this function.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
∗ The factory default setting is “ON”.
1. Press the [A] button to switch to the
adjustment selection display.
2. Press the [a] or [d] button to select
“SCRN SVR E”.
3. Press the [ ] button.
4. Turn the [ROTARY] knob clockwise or
counterclockwise to select the setting. Each
time you turn the [ROTARY] knob, the setting
changes in the following order:
SS OFF ➜ SS ON ➜ SS MESSAGE
5. Press the [ ] button to store the setting.
6. Press the [A] button to return to the previous
mode.