Clarion VXZ646 CD Player User Manual


 
VXZ646 27
English
Number of files or folders
1. A total of 255 files and folders are allowed.
(However, the maximum number of folders
must be within 254.) When the number of
files and folders is more than 256, playback
of tracks in excess of that number is
impossible.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not
always be played in the order displayed on
the PC.)
Some noise may occur depending on the
type of encoder software used while
recording.
Files created using LAME (Lame Aint MP3
Encoder) may not be played properly.
In case of a track recorded at VBR (variable
bit rate), the display for the play time of the
track may be slightly different from the actual
play time.
Also, the recommended value of VBR
ranges from 64 kbps to 320 kbps.
Depending on the damage conditions of a
file, it may occur that the file is not played
and the next file is played instead.
Also, if the damage is in a severe condition,
play stops showing the “DISC ERROR
display.
After disc selection, the play mode is
automatically engaged.
Example showing ID3 Tag display.
Note:
If ID3 Tag information was entered with 2-byte
characters, it may occur that the characters are
not reproduced properly on the monitor.
Listening to an MP3
Stopping playback
Press and hold the [ ] button for 1 second or
longer during playback.
Playback stops.
To resume playback
Press the [ ] button, and playback
resumes from the scene where playback is
stopped.
Pausing playback
Press the [ ] button during playback.
* Playback pauses.
To resume playback
Press the [ ] button again, and
playback resumes.
Skipping a track (searching)
Press the TRACK up [d] / TRACK down [a]
buttons.
Tracks are skipped, as many as the times
the button is pressed, and playback starts.
Press the [d] button, and playback starts
from the beginning of the next track.
Press the [a] button, and playback starts
from the beginning of the current track.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous track.
This operation skips the track over the folder.