Filter
Top Products
VXZ646 19
English
Searching with a chapter/title
number
You can locate the beginning of the scene using
the chapter numbers or title numbers recorded
on the DVD-Video disc.
∗ This function can only be used from the remote
control unit.
1. Press the [SEARCH MODE] button during
playback and select “[C**]”.
∗ Each time you press the button, you can
switch between title number input “[T**]”
and chapter number input “[C**]”.
•Title
A large segment to divide the data area
of the disc.
• Chapter
A small segment to divide the data area
of the disc.
2. Input the number of the title that you want to
play back with the ten-key buttons (0 to 9).
•To input the title number “12”, press “1” of
ten key buttons and then “2”.
3. Press the [ENT] button on the remote control
unit.
∗ Playback starts from the scene of the input
title number or chapter number.
• If the input title number does not exist or
searching with a title number is not
allowed, the following message appears to
invalidate the input.
Scan playback
Scans and plays back all chapters recorded on
the DVD-Video, the first 10 seconds for each.
Press the [SCN] button.
After scan playback of all chapters on the disc,
chapter scanning through the same disc is
performed again.
Depending on the disc, the menu may appear
again after scan playback of all chapters within
the title.
Press the [SCN] button again, and scan playback
is turned off.
Depending on a chapter previously set, SCAN
may be cancelled.
Press “1”.
Press “2”.
Repeat playback
This operation plays back chapters/titles
recorded on the DVD-Video repeatedly.
Press the [RPT] button for chapter repeat.
Press the [RPT] button for 1 second or longer for
title repeat.
● Chapter repeat:
Plays back one chapter repeatedly.
● Title repeat:
Plays back all chapters within the title repeatedly.
Press the [RPT] button again, and repeat
playback is turned off.
Using the title menu
On DVD discs containing two or more titles, you
can select from the title menu for playback.
1. Press the [DVD TITLE] button on the remote
control unit or press and hold the [DVD
TITLE] button for 1 second or longer on this
unit during playback.
∗ The title menu screen appears.
• Press the [MENU] button to return to the
scene before the title menu screen and
play the DVD.
• Depending on the disc, the title menu
cannot be called with [DVD TITLE] button.
2. Press the [ ], [ ], [ ], [ ] buttons or use
the ten-key buttons to select an item.
• Movement of the selected item with the
buttons differs depending on the disc.
Selection using the ten-key buttons also
differs depending on the disc.
• Depending on the disc, items cannot be
selected with the ten-key buttons.
3. Press the [ENT] button.
DVD-Video Operations