Filter
Top Products
36 VXZ646
English
Different pieces of music
heard by plural listeners
(2-ZONE function)
About the 2-ZONE function
The 2-ZONE function is a function that outputs
separate sounds from the MAIN zone and SUB
zone by simultaneously operating ttwo sources in
the one center unit, thereby allowing plural
listeners to enjoy separate music sources.
This unit can control its internal sources (radio,
DVD, etc.) to play back them, and further, can
simultaneously play back sources from external
equipment connected via CeNET (for instance,
CD changers etc.).
The sources of the MAIN zone are played back
from the speakers of the vehicle side, and those
of the SUB zone are from the headphone
systems (WH104/WH204).
Notes:
• Except AUX, the MAIN and SUB zones cannot
simultaneously use sources inside this unit.
Also, external equipment connected via CeNET
cannot simultaneously be used.
• The TV mode while the 2-ZONE function is tuned
on is forced to change to “VTR playback”.
• The ISR function cannot be operated when the 2-
ZONE function is turned on.
• The Audio mode and Z-enhancer function cannot
be set for the sources of the SUB zone.
Setting the 2-ZONE function
∗ Factory default setting is “OFF”.
When you have set the 2-ZONE function to “ON”
in the initial state, the MAIN zone services for
sources inside this unit and the SUB zone, fro
AUX. Changing a source during later use causes
the latest heard source to be invoked.
Press and hold the [ ] button for 1 second or
longer to turn on or off. When the 2-ZONE
function is turned on, “2-ZONE ON” on the
display lights.
Changing Initial Settings such as
Menu Language, etc.
Setting up the password for
setting up of the parental level
1. Following the steps 1 to 4 in “Selecting the
monitor menu”, select “PASSWORD” from
“PREFERENCES”.
2. Press the [ENT] button to display the
PASSWORD CHANGE screen.
3. Input an old password.
4. Input a new password.
5. Input a confirm password.
It is recommended that you take down a
memo about the password and keep it safely
to avoid forgetting it.
If you forget your password, you can set a
new password by entering [4356] as the OLD
PASSWORD.
Note:
When a disc with view limited is played
• When a disc with view limited is played, the
input screen requiring you to input the password
may appear. When this happens, enter the
correct password, otherwise play does not start.