Filter
Top Products
DRX9575Rz 13
Radio Operations
FM Reception
For enhanced FM performance the
®
tuner includes signal actuated stereo control,
Enhanced Multi AGC, Impulse noise reduction
curcuits and Multipath noise reduction circuits.
Listening to the radio
1. Press FUNC button 5 and select the radio
mode. The frequency or PS is displayed.
∗ PS: Programe service name
2. Press BAND button 4 and select the radio
band. Each time the button is pressed, the
radio reception band changes in the follow-
ing order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3. Press the right or left side of SEARCH button
2 to tune in the desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press BAND button 4 and select the desired
band. (FM or AM)
∗ If “MANU” is lit in the display, press and hold
BAND button 4 for 1 second or longer. “MANU”
in the display goes off and seek tuning is now
available.
2. Press the right or left side of SEARCH button
2 to automatically seek a station.
When the right side of SEARCH button 2 is
pressed, the station is sought in the direction
of higher frequencies; if the left side of
SEARCH button 2 is pressed, the station is
sought in the direction of lower frequencies.
Manual tuning
There are 2 ways available: Quick tuning and step
tuning.
When you are in the step tuning mode, the frequency
changes one step at a time. In quick tuning mode, you
can quickly tune the desired frequency.
1. Press BAND button 4 and select the desired
band. (FM or AM)
∗ If “MANU” is not lit in the display, press and
hold BAND button 4 for 1 second or longer.
“MANU” is lit in the display and manual tuning
is now available.
2. Tune into a station.
● Quick tuning:
Press and hold the right or left side of
SEARCH button 2 for 1 second or longer to
tune in a station.
● Step tuning:
Press the right or left side of SEARCH button
2 to manually tune in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exist to store individual radio stations
in memory. Pressing the corresponding preset
button recalls the stored radio frequency
automatically.
1. Press BAND button 4 and select the desired
band. (FM or AM)
2. Press S button # to display the preset
channel display.
3. Press the corresponding Preset button $ to
recall the stored station.
∗ Press and hold one of Preset buttons $ for 2
seconds or longer to store that station into
preset memory.
Manual memory
1. Press BAND button 4 and select the desired
band. (FM or AM)
2. Press S button # to display the preset
channel display.
3. Select the desired station with seek tuning,
manual tuning, or preset tuning.
4. Press and hold one of Preset buttons $ for 2
seconds or longer to store the current station
into preset memory.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially. If 6
receivable stations cannot be received, a
previously stored station remains unoverwritten
at the memory position.
1. Press BAND button 4 and select the desired
band. (FM or AM)
2. Press S button # to display the subdisplay.
3. Press and hold the number “2” of Preset but-
tons $ for 2 seconds or longer. The stations
with good reception are stored automatically
to the preset channels.
∗ If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.