Filter
Top Products
DRX9575Rz 29
DSP Operations
Professional mode/S.EQ operations
Note:
• The adjustment made in professional mode is not
reflected in the adjustment in easy mode. On the
contrary, the adjustment made in easy mode is
not reflected in the adjustment in professional
mode.
S.EQ effect ON/OFF
∗ The factory default setting is “ON”.
1. Press A-M button % and select “S.EQ”.
2. Press S button #. While the “ON” is lit in the
display, the S.EQ effect is set to “ON”.
3. Press A-M button %.
Note:
• If the S.EQ effect is set to OFF, the adjustment
made in “S.EQ operations” is not reflected in the
music source.
Selecting a S.EQ menu
1. Press A-M button % to select “S.EQ”.
2. Press BAND button 4 to select “S.EQ Basic”.
3. Press one of Direct buttons $ and select the
desired S.EQ menu.
∗ To select the user memory, press BAND button
4 to select “S.EQ User” and then press oen
of Direct buttons $.
Editing/storing a S.EQ menu (User
memory)
1. Select a S.EQ menu which you want to edit
on the basis of.
2. Press ADJ button &.
3. Press the right or left side of SEARCH button
2 to select the item to be adjusted.
There are DIFFUSE, CAR WIDTH and CAR
LENGTH available for the items to be
adjusted.
∗ For details on each adjustment item, refer to
the owner’s manual supplied with the
DPH7500z.
4. Turn the Rotary knob 3 clockwise or
counterclockwise to make the adjustment. The
adjustment range is to 1 to 10 for each item.
5. Repeat steps 3 to 4 to complete the
adjustment and press ADJ button &.
6. Press and hold one of Direct buttons $ for 2
seconds or longer to store the edited contents.
∗ You can give a title to the user memory. For the
inputting method of titles, refer to the section
“Entering titles” in “Operations common to
each mode”.
Professional mode/P.EQ operations
P.EQ effect ON/OFF
∗ The factory default setting is “ON”.
1. Press A-M button % to select “P.EQ”.
2. Press S button #. While the “ON” is lit in the
display, the P.EQ effect is set to “ON”.
3. Press A-M button %.
Note:
• If the P.EQ effect is set to OFF, the adjustment
made in “P.EQ operations” is not reflected in the
music source.
Selecting a P.EQ menu
1. Press A-M button % to select “P.EQ”.
2. Press BAND button 4 to select “P.EQ Basic”.
3. Press one of the Direct buttons $ and select
the desired P.EQ menu.
∗ To select the user memory, press BAND button
4 to select “P.EQ User” and then press one
of Direct buttons $.
Editing/storing a P.EQ menu (User
memory)
1. Select a P.EQ menu which you want to edit
on the basis of.
2. Press ADJ button &.
3. Press the right or left side of SEARCH button
2 to select the item to be adjusted.
There are selections of correction channel,
correction band, the center frequency, the Q-
curve and gain adjustment available for the
items to be adjusted.
∗ For details on each adjustment item, refer to
the owner’s manual supplied with the
DPH7500z.
4. Turn the Rotary knob 3 clockwise or
counterclockwise to make the adjustment.
5. Repeat steps 3 to 4 to complete the
adjustment and press ADJ button &.
6. Press and hold one of Direct buttons $ for 2
seconds or longer to store the edited contents.
∗ You can give a title to the user memory. For
the inputting method of titles, refer to the
section “Entering titles” in “Operations
common to each mode”.