Filter
Top Products
DRX9575Rz 25
Manual tuning
There are 2 ways available: Quick tuning and step
tuning. When you are in the step tuning mode,
the frequency changes one step at a time. In
quick tuning mode, you can quickly tune the
desired frequency.
1. Press BAND button 4 and select the desired
band. (TV1 or TV2)
∗ If “MANU” is not lit in the display, press and
hold BAND button 4 for 1 second or longer.
“MANU” is lit in the display and manual tuning
is now available.
2. Tune into a station.
● Quick tuning:
Press and hold the right or left side of
SEARCH button 2 for 1 second or longer to
tune in a station.
● Step tuning:
Press the right or left side of SEARCH button
2 to manually tune in a station.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your favorite
TV stations and store them in memory for later
recall.
1. Press BAND button 4 and select the desired
TV band. (TV1 or TV2)
2. Press S button # to display the preset
channel display.
3. To recall a stored TV station, press the desired
Preset button $ to select that station.
∗ Press and hold one of Preset buttons $ for 2
seconds or longer to store the current station
into the preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press S button # to display the preset
channel display.
3. Press and hold one of Preset buttons $ for 2
seconds or longer to store the current station
to that preset memory.
TV Operations
TV tuner functions
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner and
monitor.
Watching a TV
1. Press FUNC button 5 and select the TV
mode.
2. Press BAND button 4 to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles
between TV1 and TV2.
3. Press the right or left side of SEARCH button
2 to tune in the desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
1. Press S button # to display the subdisplay.
2. Press the number “6” of Preset buttons $ and
select the VTR.
3. To return to the TV broadcast, press the
number “6” of Preset buttons $ again.
Tuning
There are 3 types of tuning mode available, Seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press BAND button 4 and select the desired
TV band (TV1 or TV2).
∗ If “MANU” is lit on the display, press and hold
BAND button 4 for 1 second or longer.
“MANU” in the display goes off and seek tuning
is now available.
2. Press the right or left side of SEARCH button
2 to automatically seek a station. Press the
right side of SEARCH button 2 to
automatically tune up the frequency band to
the next available TV station; press the left
side to automatically tune down.