Filter
Top Products
DRX9575Rz 19
Other Handy Functions
3. If you press and hold TITLE button ) for 1
second or longer, the display switches to the
title input screen.
4. Press the right or left side of SEARCH button
2 to move the cursor.
5. Press one of Direct buttons $ from “1” to “4”
and select the character you want to enter.
You can enter title characters as follows by
pressing Direct buttons $ (1 to 6).
1 ... Capital letters
2 ... Small letters
3 ... Numbers/symbols
4 ... Umlauts
5 ... Character centering
6 ... Title clear
6. Turn the Rotary knob 3 clockwise or
counterclockwise to select the character to
enter.
7. Repeat steps 4 to 6 to enter for the title.
8. Press and hold ENT button ( for 2 seconds
or longer to store the title into memory and
cancel title input mode.
Clearing titles
1. Select and play a CD or CD in the CD changer
or tune in to a TV station for which you want
to clear the title.
2. When you press and hold TITLE button )
for 1 second or longer, the display switches
to the title input screen.
3. Press the number “6” of Direct buttons $.
4. If you press and hold ENT button ( for 2
seconds or longer, the title is cleared and title
input mode is canceled.
Title list play
You can display a list of titles, then select the disc
or broadcast station to listen to from that list.
1. With the unit in radio, CD/MD changer or TV
mode, press TITLE button ).
2. Press BAND button 4 and switch to the band
or disc you want to play.
3. Press the right or left side of SEARCH button
2 and select the desired title.
4. When you press ENT button (, the broadcast
or disc of which title you selected starts.
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗ The factory default setting is “8”. (Adjustment level:
1 to 15)
1. Press ADJ button & to switch to the adjust-
ment selection display.
2. Press the right or left side of SEARCH button
2 to select “CONTRAST”.
3. Press ENT button (.
4. Turn the Rotary knob 3 clockwise or
counterclockwise to adjust the contrast.
5. Pressing ENT button ( returns to the
adjustment selection display.
6. Press ADJ button & to return to the previous
mode.
Adjusting the dimmer level
You can adjust the reduced illumination level of
the dimmer.
∗ The factory default setting is “3”.
∗ To use the dimmer, set the dimmer setting to 1 to 5.
1. Press ADJ button & to switch to the
adjustment selection display.
2. Press the right or left side of SEARCH button
2 to select “DIMMER”.
3. Press ENT button (. “DIMMER LEV” appears
in the display.
4. Turn the Rotary knob 3 clockwise or
counterclockwise to adjust the reduced
illumination level of the dimmer.
● 1 to 5:
The dimmer operation is performed
depending on the set level 1 to 5.
● OFF:
No dimmer operation is performed.
5. Pressing ENT button ( returns to the
adjustment selection display.
6. Press ADJ button & to return to the previous
mode.
Setting the SEARCH button
illumination (Prism function)
The change in the SEARCH button illumination
color according to the unit operating state is
called the “Prism function”. You can set the
illumination pattern you prefer.
∗ The factory default setting is “PATTERN 1”.
1. Press ADJ button & to switch to the
adjustment selection display.
2. Press the right or left side of SEARCH button
2 to select “PRISM KEY”.
3. Press ENT button (.