Filter
Top Products
DRX9575Rz 27
5. Pressing ENT button ( returns to the adjust-
ment selection display.
6. Press ADJ button & to return to the previous
mode.
Output adjustment of auto loudness,
subwoofer and playback band
1. Press ADJ button & to switch to the
adjustment selection display.
2. Press the right or left side of SEARCH button
2 to select “SOUND”.
3. Press ENT button (.
4. Press the right or left side of SEARCH button
2 to select the adjustment item.
There are “A.LD LEVEL”, “WOOFER OUT”,
“WOOFER LPF”, “HPF” and “TEST TONE”
available for the adjustment items.
∗ For details on each adjustment item, refer to
the owner’s manual supplied with the
DPH7500z.
5. Turn the Rotary knob 3 clockwise or
counterclockwise to make the adjustment.
6. Pressing ENT button ( returns to the
adjustment selection display.
7. Press ADJ button & to return to the previous
mode.
Selecting the easy mode or the
professional mode
∗ The factory default setting is “EASY”.
1. Press ADJ button & to switch to the
adjustment selection display.
2. Press the right or left side of SEARCH button
2 to select “DSP/EQ SEL”.
3. Press ENT button (.
4. Turn the Rotary knob 3 clockwise or
counterclockwise to set the mode to “EASY”
or “PRO”.
5. Pressing ENT button ( returns to the
adjustment selection display.
6. Press ADJ button & to return to the previous
mode.
Entering titiles
You can give a title to the user memory of the
DSP, G.EQ, S.EQ and P.EQ that you have
adjusted yourself.
1. Press A-M button % to select the adjustment
mode in which you want to give a title.
2. Press BAND button 4 to select the “User”.
DSP operations
3. Press one of Direct buttons $ to select the
user memory to which you want to give a title.
4. Press and hold TITLE button ) for 1 second
or longer.
5. Press the right or left side of SEARCH button
2 to move the cursor.
6. Press numbers “1” to “4” of Direct buttons $
to select the character you want to enter.
When you press numbers “1” to “6” of Direct
buttons $, the following title characters can
be entered.
1 ... Capital letters
2 ... Small letters
3 ... Numbers and symbols
4 ... Umlauts
5 ... Character centering
6 ... Title clear
∗ The title clear font is used to delete a title. To
delete the title, perform the title clear operation
first and then put it into memory.
7. Turn the Rotary knob 3 clockwise or
counterclockwise to select the character you
want to input.
8. Repeat steps 5 to 7 to input the title.
9. Press and hold ENT button ( for 2 seconds
or longer to put the title into memory. The title
input mode is canceled.
Easy mode/ G.EQ operations
Note:
•
The adjustment made in easy mode is not reflected
in the adjustment in professional mode. On the
contrary, the adjustment made in professional mode
is not reflected in the adjustment in easy mode.
G.EQ effect ON/OFF
∗ The factory default setting is “ON”.
1. Press A-M button % and select “G.EQ”.
2. Press S button #. While the “ON” is lit in the
display, the G.EQ effect is set to “ON”.
3. Press A-M button %.
Note:
• If the G.EQ effect is set to OFF, the adjustment
made in “G.EQ operations” is not reflected in the
music source.
Selecting a G.EQ menu
1. Press A-M button % and select “G.EQ”.
2.
Press BAND button 4 to select “G.EQ Basic”.
3. Press one of Direct buttons $ and select the
desired G.EQ menu.