Filter
Top Products
SP2 PREAMP/PROCESSOR
3. To change the source, use the “<” button. To
toggle the trigger setting On or Off, use the
“>” button. Hit ‘Select’ to exit when finished.
8: AUX IR RECEIVER
The Aux IR Input is a miniature mono phone jack
connector. This is used to connect externally
mounted IR LED receivers, or other extenders
that provide modulated IR receiver data. Data is
retransmitted by an IR LED mounted near the front
panel IR receiver.
9: RS-232 CONNECTOR
This connection provides for control of remote con-
trol of the SP2 functions via a computer interface
or AMX/Crestron type controller. Please contact
your dealer or Bryston to make use of this optional
feature and determine which devices are compat-
ible.
10: IEC POwER INLET
11: FUSES
Please note that the Analog and Digital power sup-
plies are fused separately. Replace fuses ONLY with
an exact equivalent to avoid damage to the SP2.
12: MASTER POwER SwITCH
This switch physically interrupts all power to the
SP2. It is normally left in the ON or “1” position.
Use the front panel power switch (see pages 3 & 4)
to take the unit in and out of standby. See also
“POWER INLET & SWITCH” and “1: POWER” on
page 3.
13: VIDEO SwITCHER DATA PORT
A 1/8” phone jack serial data port for connecting to
Bryston’s SPV-1 video switcher.
THE SP2 REMOTE CONTROL
The SP2 Remote Control can
operate all front panel opera-
tions, with the addition of sev-
eral functions. By pressing the
CODE button, the remote is
also capable of sending up to
255 discrete or hidden codes,
for teaching universal remotes
and other IR based control
systems. Some buttons double
as number buttons for send-
ing discrete/hidden codes. They
are:
1: THX 6: STEREO
2: DTS 7: MODE
3: DOLBY 8: TEST
4: SURR 9: SAVE
5: DIG 0: MUTE
REAR PANEL INPUT & OUTPUT CONNECTIONS
1: BALANCED OUTPUTS
2: UNBALANCED INPUTS
3: ANALOG INPUTS
4: DIGITAL AUDIO COAXIAL INPUTS
5: TOSLINK DIGITAL AUDIO OPTICAL INPUTS
6: TAPE/RECORDING OUTPUTS
7: REMOTE 12V TRIGGER OUTPUTS
8: AUXILLIARY INFRA-RED RECEIVER
9: RS-232 SERIAL DATA CONNECTOR
10: IEC POWER CONNECTOR
11: FUSES
12: MASTER POWER SWITCH
13: SPV VIIDEO SWITCHER SERIAL DATA PORT
8
SURROUND PROCESSOR
POWER
CODE
THX
DTS
SURR
DIG
STEREO
VOL
MUTE
SAVE
TEST
MODE
TV/SAT
DVD
CD
2CH
VCR
TAPE
AUX
BYPASS
SOURCE
6CH
SUB
CENTER
OSD
REAR
BACK
SELECT
MENU
SETUP
1
8
0
2
3
4
9
7
65