Filter
Top Products
59
REFERENCE
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Lifestyle
®
remote does
not control your TV, DVD,
VCR, CBL·SAT, or other
external component
• Make sure correct codes are set. See “Operation” on page 30.
• Make sure that the front of the display is not obstructed.
• If you still cannot control your external components successfully, you may need to con-
nect the external IR emitter, included with your system, to the IR EMITTER jack on the
rear panel of the media center. See “Using the IR emitter” on page 20.
Your TV turns
on and off unexpectedly
• Reposition the TV on/off sensor on the back of your TV. Or check the SCART connector
if you use one.
• Verify that the TV on/off sensor is working properly by checking the
TV Power Status
under the Video tab in the System menu.
TV screen goes dark or
image flips repeatedly
after making a change
to a Video feature in
System settings
• In the System menu, make sure the Video format is set to NTSC (U.S. standard) or PAL
(European standard).
• In the Settings menu, make sure the SD Progressive Scan setting is off, unless you have
used a component video connection and progressive scan is a feature of the TV.
Problem What to do