Filter
Top Products
36
OPERATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Setting up to view videotapes
Once your VCR is connected to your Lifestyle
®
system,
you can set up the remote to control the VCR and start
watching videotapes.
Programming the Bose
®
remote to control
the VCR
Setting up the remote to control the VCR involves
selecting the correct VCR code, then setting the VCR to
turn on automatically when your Lifestyle
®
system is
turned on.
1. Turn on the TV.
On the TV, select the video input that is connected
to the Lifestyle
®
system.
2. Turn on the VCR.
3. On the Lifestyle
®
remote, press VCR. (See “The
remote control” on page 23 for information on
operating the remote.)
4. Press System to make the system menu appear
on the TV.
5. To display the Setup menu, select , then
press ENTER.
6. Move down to VCR Device and press ENTER.
7. Select the type of device from the list and
press ENTER.
8. Move down to VCR Brand and press ENTER.
9. Select the brand of your device and press ENTER.
10. Move down to VCR Code and press ENTER.
11. Select the first device code in the list.
12. Press the (VCR) On/Off button (located under the
VCR button).
• If the VCR turns off, you have chosen the correct
code.
• If the VCR does not turn off, select the next
device code and press VCR On/Off again.
Continue selecting codes until you find one
that works.
13. When you have a working code, enter it below, then
press ENTER.
VCR Code: ____________________
14. To exit the system menu, press Exit.
You can now use the Lifestyle
®
remote to control your
VCR.