Filter
Top Products
21
INSTALLATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
To use IR emitters with two or more devices
1. Plug the IR emitter extender connector into the
Lifestyle
®
media center.
2. Plug the IR emitter cord connector (or additional
extenders) into the IR emitter extender.
3. Place each emitter so that the flat side is against
the front panel of each device.
4. Using the supplied adhesive pads, attach the
emitters to the devices.
Note: You can use up to four IR emitters with the system.
If you need additional IR emitter extenders, contact Bose
®
Customer Service. Refer to the address sheet included in
the carton.
Figure 15 IR emitters positioned on device front panel