Filter
Top Products
32
OPERATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Controlling a cable or satellite box
Once your cable or satellite box is connected to your
Lifestyle
®
system, you can set up the remote as the
single point of control for your subscription service.
Programming the Bose
®
remote to control
the cable or satellite box
Setting up the remote to control the cable or satellite
box involves selecting the correct cable or satellite box
code.
1. Turn on the TV.
On the TV, select the video input that is connected
to the Lifestyle
®
system.
2. Turn on the cable or satellite box.
3. To display the Lifestyle
®
system menu on the TV,
press System. (See “The remote control” on
page 23 for information on operating the remote.)
4. To select the Setup tab, move right and select ,
then press ENTER.
5. Move down to CBL
•SAT Device and press
ENTER.
6. Select the correct device type from the list and
press ENTER.
If you are unsure of the device type, see the
owner’s manual for that device.
7. Move down to CBL
•SAT Brand and press ENTER.
8. Select the brand of your device from the list and
press ENTER.
9. Move down to CBL
•SAT Code and press ENTER.
10. Select the first code in the list.
11. On the Lifestyle
®
remote, press the (CBL-SAT)
On/Off button, located under the CBL-SAT button.
• If the device turns off, you have chosen the
correct code.
• If the device does not turn off, select the next
code and press (CBL-SAT) On/Off again.
Continue selecting codes until you find one
that works.
12. When you have a working code, enter it below, then
press ENTER.
CBL-SAT Code: ____________________
13. To exit the system menu, press Exit.