Filter
Top Products
16
INSTALLATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
3. Using the remote control that came with your TV,
turn on your TV.
4. Using the Lifestyle
®
remote control, press System.
5. To move right to the Setup menu, press the
right arrow then press ENTER.
6. Move down to TV Power
by pressing the down
arrow, then press ENTER.
7. Move up or down to select the proper TV Power
option to detect the TV sensor:
• Automatic (for TV models that do not use a
European-style SCART connector).
• Euro Connector (for TV models that use a
European-style SCART connector).
8. Press ENTER.
Below the highlighted TV Power
item is TV Power
Status. The value for this item changes from Not
Detected to TV On, when the sensor is properly
positioned.
Note: It may be helpful to get an assistant for the next
step and have one person view the screen, while the
other moves the sensor.
9. Hold the sensor against the rear of the TV and
slowly move it around until TV Power Status
changes from Not Detected to TV On.
10. When the TV Power Status indicates TV On,
press Exit to exit the System menu.
This completes sensor activation.